Manufacturer Acoustic Wood Slat Panels

If you're planning to install acoustic panels to improve your room’s sound quality, you might be wondering — will they make the room hotter? This is a common concern, especially in home studios, offices, or living spaces where comfort matters just as much as acoustics. The good news is: acoustic panels don’t significantly raise room temperature — especially when you choose the right materials and installation methods. As one of the leading manufacturers and exporters of wood slat acoustic panels in China, Guangdong Leeyin Acoustics is here to break it down for you with expert insights and facts. 🔍 Do Acoustic Panels Trap Heat? In general, acoustic panels are not designed to insulate heat like thermal insulation materials. However, because they cover wall or ceiling surfaces, they may reduce airflow if your room relies heavily on wall-mounted ventilation. That said, the impact is minimal and barely noticeable—especially when using Leeyin's wooden slat PET acoustic panels, which are: Lightweight Breathable Engineered for sound absorption, not thermal insulation 🪵 Why Leeyin Panels Are Temperature-Neutral At Leeyin Acoustics, we design our panels with both acoustic performance and material balance in mind: ✅ Materials That Don’t Trap Heat Recycled PET felt backing: Breathable and moisture-resistant E0 MDF slats: Engineered to remain dimensionally stable without affecting temperature Open slat design: Allows air movement and doesn't seal off entire surfaces like foam or fiberglass might ✅ Optimized for Airflow Unlike thick foam blocks that can reduce ventilation, our slatted designs allow natural airflow while maintaining superior sound absorption. 🏠 Real-World Use: Do Customers Notice a Temperature Change? Most Leeyin customers across residential, commercial, and studio installations report no noticeable temperature difference after panel installation. As long as your room has proper ventilation, HVAC, or airflow, the panels won’t affect the ambient temperature. 🌿 Bonus: Thermal Benefits in Some Cases In some environments, acoustic panels may slightly improve thermal comfort by: Reducing wall surface temperature fluctuations Preventing cold echo from bare walls in winter Adding minor thermal resistance, particularly on exterior-facing walls But again, this effect is secondary and not the primary function of acoustic panels. 🏭 Why Trust Guangdong Leeyin Acoustics? As a trusted leader in wood slat acoustic panel manufacturing, we bring: A 20,000㎡ modern production base Certified E0 & FSC materials for health and sustainability Advanced quality control under international management systems Global export experience, especially in Europe, North America, and the Middle East   Whether you're designing a studio, office, cinema, or home interior, Leeyin panels deliver style, sound control, and comfort—without overheating your space.

When designing an acoustically treated space—whether it’s a home studio, office, theater, or residential interior—acoustic panels play a vital role in controlling sound reflections, echo, and reverberation. One common question we receive is:“Should acoustic panels be installed vertically or horizontally?” As a leading Chinese manufacturer and exporter of wooden slat acoustic wall panels, Guangdong Leeyin Acoustics Technology Co., Ltd. is here to guide you through this important design decision with both technical insight and aesthetic consideration. 🔍 The Short Answer Both vertical and horizontal installations are effective, but the best orientation depends on: Room size and shape Primary sound reflection points Aesthetic goals Type of space (e.g., home studio vs. living room) Let’s break it down. 📐 Acoustic Considerations: Vertical vs. Horizontal ✅ Vertical Installation Best for: Narrow walls, high ceilings, speech clarity Helps absorb reflections at ear level (important in offices, meeting rooms, and studios) Breaks up vertical sound waves traveling from floor to ceiling Enhances room height perception and symmetry Ideal placement behind speakers or workstations Vertical panels are particularly useful in conference rooms, classrooms, and podcast setups where speech intelligibility matters. ✅ Horizontal Installation Best for: Large open spaces, low ceilings, home cinemas Helps reduce flutter echoes between long walls Adds a balanced, linear visual effect to wide rooms Ideal for absorbing lateral reflections in home theaters, recording studios, and lounge areas Horizontal orientation can also emphasize the room’s width, contributing to a more relaxed or modern aesthetic. 🛠️ Functional Tip: Mix Both Orientations For optimal acoustic performance, a combination of vertical and horizontal panels is often recommended—especially in larger or irregularly shaped rooms. Vertically placed panels can target speech and direct reflections Horizontally placed panels help break up long wall surfaces and tackle mid- to high-frequency reverberation 🪵 Aesthetic Flexibility with Leeyin Panels At Liyin Acoustics, our wooden slat acoustic panels are not just acoustically effective—they’re visually stunning. With multiple wood veneers, PET backing colors, and customizable lengths, they can be mounted vertically or horizontally with ease. Why Our Panels Stand Out: 🌱 Made from FSC-certified wood veneer 🛡️ Manufactured using E0-grade MDF—safe, low formaldehyde 🔥 Fire-resistant and environmentally friendly 🛠️ Easy to cut, install, and maintain 🎨 Compatible with both vertical and horizontal designs 🏭 About Guangdong Leeyin Acoustics As a pioneer in acoustic wall solutions, Guangdong Liyin Acoustics Technology Co., Ltd. has a:   💼 20,000 m² modern manufacturing facility 🌍 Strong export presence in Europe, North America, and Southeast Asia 🔧 Strict adherence to international quality standards (ISO, FSC, SGS) 💡 Specialized focus on wooden slat acoustic panels for both commercial and residential applications

When designing a space with optimal sound quality—whether it's a home studio, office, or commercial setting—acoustic treatment plays a critical role. One common question in DIY acoustics is: “How thick should DIY acoustic panels be?” The answer can vary depending on your acoustic goals, but let’s explore the most effective options. At Guangdong Liyin Acoustics Technology Co., Ltd.( Leeyin ) , we specialize in high-performance wood slat acoustic panels designed to offer exceptional sound absorption, visual elegance, and environmental sustainability. As a leading manufacturer and exporter in China, we’re proud to support both B2B clients and project contractors worldwide. 📐 Ideal Thickness for DIY Acoustic Panels When it comes to sound absorption, thicker panels generally absorb more low-frequency sound, while thinner ones are better for high-frequency noise. Here's a general breakdown: 1 inch (25 mm) – Suitable for basic echo control and high-frequency absorption in smaller rooms. 2 inches (50 mm) – A popular DIY choice, offering a balance between performance and material use. 4 inches (100 mm) – Excellent for broadband absorption, especially effective for bass frequencies. For most home or studio DIY setups, 2-inch thick panels offer the best mix of acoustic performance and cost-efficiency. 🧪 Thickness vs. Absorption: What the Science Says The NRC (Noise Reduction Coefficient) increases with panel thickness. For example: 1" panel: NRC around 0.50–0.60 2" panel: NRC around 0.80–0.95 4" panel: NRC up to 1.0+ Thicker panels, especially when combined with an air gap behind the panel, significantly enhance low-frequency absorption—a critical factor for music studios and media rooms. 🪵 What Materials Should You Use? For your DIY acoustic panels, the materials matter just as much as the thickness. At Liyin Acoustics, our panels are made from: PET Felt (Recycled, Eco-friendly, Lightweight) E0 MDF (Formaldehyde-free, Safe for Interiors) Wooden Slats (Decorative + Diffusive) All materials are FSC-certified and meet international acoustic and fire safety standards. If you're making your own panels, using high-density mineral wool or fiberglass at 2–4 inches thickness is recommended. But if you’re looking for a professional finish, our ready-to-install wooden slat acoustic panels are ideal. 💡 Why Choose Liyin’s Wood Slat Acoustic Panels? ✅ Beautiful design with real wood veneer or melamine finishes✅ E0-grade MDF + PET backing for high-performance absorption✅ Tested sound absorption coefficients✅ Quick and easy installation (glue, screw, or mounting track)✅ Sustainable and certified materials✅ 20,000 m² advanced production facility✅ Global B2B export experience to Europe, North America, and Southeast Asia 🎯 Final Thoughts If you’re planning to build your own acoustic panels, 2 to 4 inches thickness is the sweet spot for excellent results. However, for those looking for aesthetics, durability, and professional-grade performance, Liyin Acoustics' wood slat acoustic panels are the ultimate choice.   Let’s make sound beautiful—both technically and visually.

When it comes to improving the acoustic comfort of your bedroom, acoustic panels are a smart and stylish solution. But one of the most common questions we get is: “How many acoustic panels do I actually need for my bedroom?” At Guangdong Liyin Acoustics Technology Co., Ltd. (leeyin) , we specialize in the production and export of premium wood slat acoustic panels, helping B2B customers around the world transform indoor environments with sound-absorbing design. In this guide, we’ll walk you through how to calculate the number of acoustic panels needed — while also showcasing how our PET-backed E0 MDF wood slat panels combine function with aesthetics. Why Acoustic Panels in the Bedroom? Bedrooms are meant to be quiet, peaceful retreats — but poor acoustics can lead to echo, noise disturbances, and reduced privacy. Acoustic panels: Absorb mid-to-high frequency noise Minimize echo and reverberation Improve sleep quality and voice clarity Enhance overall comfort and interior design The General Rule: 15% to 30% Wall Coverage For residential spaces like bedrooms, covering 15% to 30% of the total wall area with acoustic panels is typically enough to make a noticeable difference. 🧮 Step-by-Step Panel Estimate: Measure your room (Length × Width × Height) For example: A 4m × 3m × 2.5m room has 32 m² of wall space (not counting windows/doors). Calculate 20–25% of that surface 32 m² × 25% = 8 m² of acoustic panel coverage Panel size consideration If using standard 2400mm × 600mm wood slat panels (1.44 m² each), you'll need about 5–6 panels. Room Size Guide (Estimate Only) Bedroom Size Recommended Panels (2400×600mm) Small (under 10 m²) 3–4 panels Medium (10–20 m²) 5–7 panels Large (20+ m²) 8–10+ panels   Note: Exact needs vary depending on ceiling height, furniture, carpeting, and wall texture. Where to Place the Panels? To get the most out of your panels: Place them behind the bed or on side walls for primary absorption. Use corner placement to minimize bass buildup. Consider adding ceiling panels if you have high or echo-prone ceilings. 👉 Read our full guide: Where Should Acoustic Panels Be Placed in a Bedroom? Why Choose Liyin’s Wood Slat Acoustic Panels? As one of China's leading manufacturers and exporters of acoustic wall solutions, we deliver unmatched performance and beauty in every panel. ✅ Our Strengths: 20,000㎡ modern production facility Strict quality control under ISO and international standards Use of eco-friendly PET felt + E0-grade MDF FSC-certified wood for sustainability OEM & ODM options available Global shipping across Europe, North America, Southeast Asia & more   Our wood slat acoustic panels not only reduce sound reflections but also enhance the elegance of your bedroom interiors. export@gzliyin.com    

When it comes to creating a peaceful and acoustically balanced bedroom, one of the most effective solutions is installing acoustic panels. But a common question we hear at Guangdong Liyin Acoustics Technology Co., Ltd. (leeyin)  is: “Where should acoustic panels be placed in a bedroom for the best results?” As a leading manufacturer and exporter of wood slat acoustic panels in China, we’re here to share expert insights that not only improve your room’s sound quality but also elevate the overall design. Why Use Acoustic Panels in a Bedroom? Acoustic panels are not just for studios or office spaces — they play a major role in absorbing unwanted noise, reducing echo, and improving speech clarity in residential environments. In bedrooms, this helps create a more restful, quiet space that supports better sleep and privacy. Ideal Placement of Acoustic Panels in a Bedroom 1. 🎯 Behind the Bed (Headboard Wall) Placing panels on the wall directly behind your bed helps absorb sound that would otherwise reflect off hard surfaces. This is a great position for enhancing comfort and serenity in the sleep zone. Recommended Panel: Wood slat acoustic panels with PET backing for both performance and style. 2. 🔇 Opposite Wall (Facing the Bed) Sound bounces between parallel walls — adding acoustic panels on the wall facing your bed breaks this cycle and reduces echo. This placement also enhances audio quality if you watch TV or listen to music in your bedroom. 3. 🔊 Side Walls (Reflection Points) Side walls are often overlooked but are essential, especially if you use a speaker setup or voice assistant. Acoustic panels on these walls catch early reflections and prevent sound from bouncing around the room. 4. 🔝 Ceiling (Optional but Effective) For high ceilings or rooms with excessive reverb, ceiling-mounted acoustic panels — sometimes called cloud panels — are very effective. This is especially useful in minimalist or modern bedrooms with fewer soft furnishings. 5. 🚪 Around Doors and Windows Sound can leak through gaps near windows and doors. While acoustic panels don’t block sound completely, placing them adjacent to or above doors/windows helps absorb some of the reflected sound energy. Tips for Best Results Start with 15–25% coverage of your bedroom walls for noticeable improvement. Combine panel placement with thick curtains, carpets, and soft furnishings for full acoustic balance. Use symmetric placement when possible for a balanced sound experience. Why Choose Liyin Acoustic Panels? At Guangdong Liyin Acoustics Technology Co., Ltd., our wooden slat acoustic panels are not only effective at absorbing sound but also beautifully crafted to match contemporary interior styles. Our Strengths:   ✅ Over 20,000㎡ of advanced production facilities✅ Use of eco-friendly PET felt + E0 grade MDF core✅ FSC-certified materials for sustainability✅ Global exports to Europe, North America, Southeast Asia, and more✅ Quick lead times & custom OEM/ODM options✅ Modern designs tailored for homes, offices, and hospitality spaces

When it comes to improving sound in a room, one common question is: what’s the difference between soundproof panels and acoustic panels? Although they may seem similar, these two types of panels serve very different purposes — and choosing the right one depends on your goals. At Guangdong Liyin Acoustics Technology Co., Ltd.  (leeyin) , we specialize in wood slat acoustic panels and are one of China’s leading manufacturers and exporters in this field. In this article, we break down the core differences between soundproof panels and acoustic panels to help you make the right decision for your project. 🔊 Soundproof Panels: Keep Noise In or Out Soundproofing panels are designed to block sound transmission between spaces. Their primary function is to prevent external noise from entering a room or keep internal noise from escaping. Features: Made from dense, heavy materials like mass-loaded vinyl, gypsum, or multi-layer composites. Ideal for walls, floors, ceilings, and even doors. Used in recording studios, home theaters, hotel rooms, and shared office spaces. Purpose: Isolate sound. Reduce sound transfer through building structures. Prevent disturbance between neighboring rooms. 🎧 Acoustic Panels: Improve Sound Within the Room Acoustic panels, such as our wood slat PET acoustic panels, are designed to absorb sound inside a room to reduce echo, reverberation, and background noise. Features: Made with sound-absorbing materials like PET felt, fabric-wrapped fiberglass, or perforated wood. Available in decorative designs such as wooden slat panels for a modern interior aesthetic. Installed on walls and ceilings to enhance sound quality. Purpose: Improve audio clarity and speech intelligibility. Eliminate echo and flutter. Create comfortable acoustics in offices, conference rooms, restaurants, homes, and more. Key Differences at a Glance: Feature Soundproof Panels Acoustic Panels Function Block sound transmission Absorb internal sound Material Dense & heavy Soft & porous Application Walls, ceilings, floors Walls and ceilings Main Goal Keep sound in or out Improve in-room sound Common Use Recording studios, apartments Offices, studios, homes   Why Choose Liyin Acoustics Panels? At Guangdong Liyin Acoustics Technology Co., Ltd., we focus on producing high-performance wood slat acoustic panels backed with eco-friendly PET felt. Our panels are trusted by architects, designers, and contractors globally thanks to: ✅ 20,000㎡ modern production facility✅ International-standard quality control✅ E0 MDF + PET materials, FSC certified✅ Stylish slat designs with proven acoustic performance✅ Global exports across Europe, North America, and Southeast Asia✅ OEM/ODM services for custom finishes and specifications Final Thoughts If you're looking to block noise from entering or leaving a space, soundproof panels are the answer. But if your goal is to improve the sound environment inside a room, then acoustic panels — like the ones we manufacture at Liyin Acoustics — are exactly what you need.   Looking for a professional acoustic solution that combines functionality, aesthetics, and sustainability? Contact us today and discover how Liyin Acoustics can support your next project. export@gzliyin.com  

A Cost vs. Quality Comparison by Leeyin Acoustics When it comes to soundproofing or acoustic treatment, many business owners and contractors wonder:“Is it cheaper to make your own acoustic panels?” While DIY acoustic panels may seem like a cost-saving option, there are several factors to consider—materials, time, labor, performance, and aesthetics. At Guangdong Liyin Acoustics Technology Co., Ltd., we specialize in wood slat wall panels and high-performance acoustic panel systems, offering factory-direct quality and value that often outmatch the DIY route. 🧰 DIY Acoustic Panels: Pros and Cons ✅ Pros: Lower upfront material costs (wood, fabric, insulation). Customizable to some extent. ❌ Cons: Time-consuming: Cutting, assembling, and covering panels takes hours or days. Inconsistent performance: DIY panels often lack proper NRC ratings. Limited fire safety: Homemade panels may not meet building code standards. Unprofessional appearance: DIY options rarely achieve a polished, architectural-grade finish. 💡 The True Cost of DIY vs. Factory-Made Panels Factor DIY Panels Liyin Acoustic Panels Materials $20–$40 per panel (low quality) Optimized for durability & performance Time & Labor 2–3 hours per panel Ready to install with minimal effort Sound Performance Unrated, inconsistent Tested with verified NRC ratings Aesthetics Basic, rough appearance Elegant wood slat finish with PET felt backing Compliance May lack fire/environmental ratings Meets strict international quality standards   ➡️ While DIY might seem “cheaper” on paper, factory-made acoustic panels provide better long-term value, especially for commercial and B2B applications. 🎯 Why Businesses Choose Liyin Acoustics Panels At Guangdong Liyin Acoustics Technology Co., Ltd., we deliver professional-grade acoustic panel solutions designed for performance and style. Our panels are widely used in: Corporate interiors Hospitality design Retail environments Educational and institutional spaces Residential and home theaters We Offer: ✅ 20,000 m² of modern production facilities✅ OEM/ODM customization for global clients✅ Exports to Europe, North America, and Southeast Asia✅ PET felt-backed wood slat panels for sound absorption & easy installation✅ Fast lead times & logistics support✅ Fire resistance & environmental certifications

When designing a modern interior, functionality and aesthetics often go hand-in-hand. Acoustic wall panels—especially stylish wood slat acoustic panels—have become a popular choice for improving sound quality while elevating the look of a space. But a common question arises: Can you hang a TV directly into an acoustic wall panel? The Short Answer: It Depends on the Panel Structure While acoustic panels are designed to manage sound reflections and improve acoustics, they are not typically engineered to bear the full weight of heavy objects like a television. Most acoustic wall panels, including those produced by Guangdong Liyin Acoustics Technology Co., Ltd. (Leeyin) , feature a PET felt backing and decorative wooden slats—excellent for sound absorption, but not intended as a structural support surface. What You Should Know Before Mounting a TV Here are the key considerations: 1. Check the Wall Behind the Panel Acoustic panels are usually mounted on solid surfaces like drywall, brick, or concrete. If the underlying wall is structurally sound and capable of supporting a TV, then mounting through the panel into the wall is generally safe. In this case, longer mounting screws can be used to reach the solid wall beneath the panel. 2. Use a Reinforced Mounting Strategy To ensure safety and durability, it’s recommended to: Locate wall studs or install mounting brackets directly into the structural wall. Pre-cut the acoustic panel or leave a space in the panel layout for the TV mount. Use a TV mounting plate or frame to distribute the load more evenly if you're concerned about damaging the panel surface. 3. Don’t Rely Solely on the Acoustic Panel Even though our wood slat acoustic panels are high-quality and durable, they are not designed to hold significant weight on their own. Always anchor the load to the wall behind the panel, not the panel itself. Why Choose Liyin Acoustic Panels for Your Interiors? At Guangdong Liyin Acoustics Technology Co., Ltd., we are not just a manufacturer—we are specialists in wood slat acoustic panels and PET-backed acoustic solutions. As a leading exporter in China, we provide:   ✅ 20,000 m² modern production facility✅ International-standard quality management✅ Customized OEM/ODM services✅ Fast lead times and global shipping✅ Beautiful wood slat finishes that integrate seamlessly with modern interior elements, including TVs and lighting fixtures

A Guide to Customizing Wood Slat Acoustic Panels Acupanel, also known as wood slat acoustic panel, is becoming a staple in modern interior design—not only for its sound-absorbing functionality, but also for its sleek, contemporary aesthetics. Whether you’re installing panels in a home, office, studio, or commercial space, you may be wondering:Can you cut Acupanel to fit your space perfectly?The answer is yes—and it’s easier than you think. In this blog post, we’ll walk you through how to safely cut Acupanel for a custom fit, and why Guangdong Liyin Acoustics Technology Co., Ltd. (leeyin)  is your go-to supplier for high-quality wood slat acoustic panels with excellent flexibility and design potential. ✅ Can Acupanel Be Cut? Absolutely. Yes, Acupanel can be cut to fit specific spaces, angles, or design layouts. Whether you’re covering a full wall, working around electrical outlets, or designing around corners, the flexibility of Acupanel makes it ideal for custom installations. Liyin’s acoustic panels are constructed with: MDF (Medium-Density Fiberboard) slats: Easy to trim while maintaining edge quality PET felt backing: Lightweight, flexible, and simple to cut with a sharp utility knife or saw 🔧 How to Cut Acupanel the Right Way For a clean, professional result, follow these simple steps: Measure and mark: Use a pencil and tape measure to mark where you need to cut. Use the right tools: For straight cuts: a circular saw or fine-tooth handsaw works best. For intricate or small adjustments: a jigsaw or utility knife. Secure the panel: Clamp the panel to a stable surface to avoid movement while cutting. Cut carefully: Slow, controlled cutting ensures smooth edges without damaging the slats or felt backing. Sand if needed: Gently sand edges for a clean finish. Tip: Always wear protective equipment like gloves and safety glasses. 🛠️ Why Liyin Acupanel Is Easy to Customize At Guangdong Liyin Acoustics Technology Co., Ltd., we manufacture high-quality wood slat acoustic panels using precision-engineered materials. Our panels are not only acoustically effective, but also designed for hassle-free installation and customization. Key product features: High-density MDF slats for strength and workability Eco-friendly PET felt backing for sound absorption and easy cutting Consistent finish and dimensions for seamless panel alignment Multiple color options to match any interior design 🌏 Why Choose Liyin Acoustics? As a leading wood slat wall panel exporter in China, Guangdong Liyin Acoustics Technology Co., Ltd. offers:   Over 20,000 square meters of modern production facilities International-standard quality control systems A strong R&D team and experienced manufacturing staff Fast and reliable global shipping and support Custom size and design options for OEM/ODM clients